how do I know if I need a new gimbal bearing (trs drive/borg warner trans)
I am freshening up the drives on my boat and am ordering new trim position sensors, indicator cables, hydraulic trim lines,etc
The boat was meticulously maintained, but I have no idea when this stuff had been serviced or gone through. the boat worked perfect in the water last summer, and not sure if its worth the extra hassle to have the gimbal bearings replaced thanks -Darko |
when it locks up and heats up so much while your running that your driveshaft snaps and blows through your bellows, then the boat starts sinking. Atleast thats when I replaced mine........
|
Originally Posted by 302Sport
(Post 3618312)
when it locks up and heats up so much while your running that your driveshaft snaps and blows through your bellows, then the boat starts sinking. Atleast thats when I replaced mine........
hmmm, so in other words its good preventative maintenance! |
If the drives off and you have no idea if the bearing has ever been replaced, replace it. Its not an item you can replace with the boat in the water how about the bellows?
|
All times are GMT -5. The time now is 12:49 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.