back flush help
#1
Registered
Thread Starter
back flush help
My 502 mag (1998) was running warm so I removed the sea water pump and impeller. Had a few pieces gone and they were not in the housing.
How do I back flush? I thought it was from one of the hoses going into the thermostat housing but there are (4) two on each side. Which hose do I use and how? Just stick a garden hose in the hose?
Thanks,
Padraig
How do I back flush? I thought it was from one of the hoses going into the thermostat housing but there are (4) two on each side. Which hose do I use and how? Just stick a garden hose in the hose?
Thanks,
Padraig