Need 2 Bravo One Sportmasters
#1
Registered
Thread Starter
Need 2 Bravo One Sportmasters
I just cracked two more lower legs right at the top of the carrier. These were beefed in the area the last two cracked, but only got 25 hours out of these. I am looking for 2 standard length SS lowers, we presently have plenty of internals if they will fit the new sportmasters. Would consider them either way.
Thanks, John B
([email protected])
Thanks, John B
([email protected])
#3
Platinum Member
Platinum Member
broken lowers
John, did you weld them last time they broke? I cracked my bravo and I am looking at welding it back. I only cracked them right at the back were the spanner nut screws in, holding the bearing carrier in. Any thoughts?
Thanks
Robert
Thanks
Robert
#4
Registered
Thread Starter
Fountain38,
Yes the last two were welded, they looked like a Pro Max 300 outboards when done. These are cracking just above the carrier hole, going forward. Stockers cracked on both sides, the welded ones on one side only.
Let us know how you make out.
Yes the last two were welded, they looked like a Pro Max 300 outboards when done. These are cracking just above the carrier hole, going forward. Stockers cracked on both sides, the welded ones on one side only.
Let us know how you make out.
#5
Platinum Member
Platinum Member
Thanks John.