HP500 Performance Curves
#1
Registered
Thread Starter
Join Date: Jan 2007
Location: Louisville, KY
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
HP500 Performance Curves
I don't know if Mercury ever published the horsepower and torque curves for this engine. Anyone have them or had theirs dyno'ed and have all the numbers?
Mike
Mike
#3
Mike,
Here's a thread from another site that has a post in it with the dynor results from a stock carbed 500HP. If you don't have a registration to view the file, let me know and I will email it to you. Basically, the motor pulled a peak of 530 HP at 5400, and peak torque was 546 at 4300 RPM. It has a nice broad torque curve, 540+ ft/lb from 3500 all the way to 4800 lb.
http://www.speedwake.com/forums/show...ght=hp500+dyno
I may have to go hunting for a good used 500HP carb cam.
Here's a thread from another site that has a post in it with the dynor results from a stock carbed 500HP. If you don't have a registration to view the file, let me know and I will email it to you. Basically, the motor pulled a peak of 530 HP at 5400, and peak torque was 546 at 4300 RPM. It has a nice broad torque curve, 540+ ft/lb from 3500 all the way to 4800 lb.
http://www.speedwake.com/forums/show...ght=hp500+dyno
I may have to go hunting for a good used 500HP carb cam.