Arneson+whipple
#1
Registered
Thread Starter
Join Date: May 2010
Location: Cedar Springs MI
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Arneson+whipple
Anyone have any input on how a pair of Arneson asd6's would hold up to a pair 525's with the whipple kit's. Boat is a 7200 pound v hull.
#2
arneson-industries.com
Offshoreonly Advertiser
I have done several of these in the past. There is a Hustler 388 for example out if PA that has over 500 hrs on them.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#3
Registered
Thread Starter
Join Date: May 2010
Location: Cedar Springs MI
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Excellent! I was on your website and saw that they are rated for 750 foot pounds, but I think the whipple kit would make slightly morte than this. Didn't know if we would be pushing the ragged edge, or a nice reliable setup?
#4
Registered
mike