looking for 454 mag upgrades or maybe new motor
#1
Registered
Thread Starter
Join Date: Jun 2011
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
looking for 454 mag upgrades or maybe new motor
was curious what i could do to get a little more horsepower out of this motor? if this would be the way to go? or look for another motor that i could drop in .. any help would be great thanks alot, motor has 600 hours on it , no smoke , doesnt burn any oil , just looking for a winter project
#2
JC Performance Engines
Gold Member
I had a 454 bored 30 over, balanced crank, new cam, new head, new intake, new everything.
Dyno'd 560hp and has been running for years.
Don't forget you'll need a new exhuast.
Dyno'd 560hp and has been running for years.
Don't forget you'll need a new exhuast.
#3
Registered
Thread Starter
Join Date: Jun 2011
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
hey
anyway to keep the silent choice option? kind of nice it doesnt have to be loud all the time haha , what was the cost on doing all of this ? and what parts did you use .. next question what will the bravo one leg handle?
#4
Registered
Join Date: May 2012
Location: las vegas
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
I had one in my old Carerra and it had thru the prop exhaust and I could get 4200rpm out of it and I put on,Holley750,eddelbrock performer manifold,MSD ignition system,roller rockers,highflo sparkarrestor and ran the exhaust out the transom with stock manifolds and I picked up almost 400rpm and it ran like an injected motor,I would have got more with better exhaust but sold it before I did that and I had about the same hours when I did that and ran it up to almost 800 hrs with no problems.Those are great motors and respond well to mods.These parts are a good start without going into the bottom end and are all reasonably easy to install.You can just go to a mail order house like CP performance and get all parts from them.Have fun,I did.
#5
JC Performance Engines
Gold Member
Don't know the parts, was built by JC Performance.
IIRC, it must have been 5000+exhaust?
cant really remember, and try not to...
#7
JC Performance Engines
Gold Member
You are better off building/buying an HP engine, and keeping your stocker for when its time to sell.
Or even have a backup just in case.
Not a bad piece... especially if it comes w/ the exhaust.
http://www.offshoreonly.com/classifi...o46889-en.html
Or even have a backup just in case.
Not a bad piece... especially if it comes w/ the exhaust.
http://www.offshoreonly.com/classifi...o46889-en.html