POV Video from Port Huron Class 6 Race Start
08-13-2012, 01:25 PM
#1
Racer
RacerThread Starter
Join Date: Aug 2004
Location: Chesterfield, MI
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
POV Video from Port Huron Class 6 Race Start
It's been cut down to eliminate the milling and boring stuff but the GoPro helmet cam does a great job at showing the racer point of view (POV).. enjoy.
Rick K
#619 Team PFE Racing
[YOUTUBE]sW7LWvwdgrs[/YOUTUBE]
Rick K
#619 Team PFE Racing
[YOUTUBE]sW7LWvwdgrs[/YOUTUBE]
08-13-2012, 02:09 PM
#5
Platinum Member
Platinum Member
You are right! The helmet cam lets racing fans know exactly what it is like to be in the race boat racing. It would be great if every boat had that and the engine sounds are fantastic, even better then hearing it from shore. Sorry to see that you guys broke. Thanks for posting the video, it is appreciated.
08-13-2012, 02:15 PM
#6
Racer
RacerThread Starter
Join Date: Aug 2004
Location: Chesterfield, MI
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Class 6 boats range in power from 500hp to 850hp (or so I was told).. the engine we are running makes 719hp on pump gas.
Speed is limited to 70mph, so building a strong torque motor for acceleration is a must.
We raced 3 years on that bravo unit with out every tearing it down.. Just changed the oil every so often.. I'm really surprised it lasted as long as it had.
But it's all good and we will be back at it for the next round.
Speed is limited to 70mph, so building a strong torque motor for acceleration is a must.
You are right! The helmet cam lets racing fans know exactly what it is like to be in the race boat racing. It would be great if every boat had that and the engine sounds are fantastic, even better then hearing it from shore. Sorry to see that you guys broke. Thanks for posting the video, it is appreciated.
We raced 3 years on that bravo unit with out every tearing it down.. Just changed the oil every so often.. I'm really surprised it lasted as long as it had.
But it's all good and we will be back at it for the next round.
08-13-2012, 05:09 PM
#7
Registered
iTrader: (3)
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Very cool! 
Quick question......what makes the video distort? Is it the type of lens or does it have something to do with the vibration? I have seen many go-pro videos and don't think I remember that distortion.
Thanks
Jim
Quick question......what makes the video distort? Is it the type of lens or does it have something to do with the vibration? I have seen many go-pro videos and don't think I remember that distortion.
Thanks
Jim
