Little stereo build on 25 Outlaw (lots of pictures!!)
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Mar 2011
Location: Beaumont TX
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Little stereo build on 25 Outlaw (lots of pictures!!)
Just a few pictures of my stereo build on my 25 Outlaw....everything is Memphis...including all the speaker, power, ground wire, RCAs amps, speakers...fuse blocks etc.
We are almost done with everything...still have a couple fiberglass pods to build to get some more sound out of the boat.
Enjoy....
Little comparison of Memphis 0G vs Rockford 0G power wire
And a short video of it before I put the seats and all back in
We are almost done with everything...still have a couple fiberglass pods to build to get some more sound out of the boat.
Enjoy....
Little comparison of Memphis 0G vs Rockford 0G power wire
And a short video of it before I put the seats and all back in
Last edited by SBX; 04-18-2013 at 11:45 AM.
#4
Registered
Thread Starter
iTrader: (1)
Join Date: Mar 2011
Location: Beaumont TX
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
I know its a little overkill LOL.......but I manage a stereo shop which is owned by a really good friend of mine...so since it was within hands reach....I grabbed it...hahaha
#8
Registered
Thread Starter
iTrader: (1)
Join Date: Mar 2011
Location: Beaumont TX
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
I can do any size...we have them cut here locally.
6.5/8" are about $35-40 including the LEDs
LOL...yes Casey it is your old boat....if taking care of it means taking an air saw and cutting everything I can reach then yes...very much so hahaha....the purple LEDs in the dash look great...and everything matches now.
6.5/8" are about $35-40 including the LEDs
LOL...yes Casey it is your old boat....if taking care of it means taking an air saw and cutting everything I can reach then yes...very much so hahaha....the purple LEDs in the dash look great...and everything matches now.