Paint question
Could someone with painting experience help me with this.
I painted a small section on our trailer with PPG paint and activator. I would like to know how long to wait before wetsanding and buffing the ridge left behind from the masking tape. Thanks, Rick |
In the heat of summer I have sanded PPG paint the next day,....Fred
|
Thanks Fred,
I will have to move it out into the sun, sounds like it should be ready then. Rick |
TooOld,
It is a single stage paint, no clear coat. I think the numbers are something like AU 100 and 101. Rick |
Next time you do this pull the tape when it is still real wet then the edge will blend in for you :D:D
|
Thanks for the info and tip, guys. Next time I will try pulling the tape early.
Rick |
actually next time mask off with paper rolled farther back feather the paint out in steps and then after the last coat take a hot reducer ad spray directly over the dry area to melt down the feather edge and walla your done and no sanding or polishing well maybe a little polishing and you wouldnt even see a mask line or a difference in color. unless the colors or terrible off in the first place. your eye cant pick up a gradule change in color as a straight tape line creates.
|
All times are GMT -5. The time now is 08:52 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.