Notices

Do glass work?

Old 09-19-2013, 03:23 PM
  #1  
Registered
Thread Starter
 
Join Date: Jan 2006
Location: St. Pete Beach, FL
Posts: 3,556
Received 553 Likes on 329 Posts
Default Do glass work?

It only needs a little ;D
http://bit.ly/14nzRye

eBay item 141066866418



hogie roll is offline  
Old 09-19-2013, 03:37 PM
  #2  
Registered
iTrader: (1)
 
Join Date: Jul 2007
Location: MI
Posts: 2,639
Received 12 Likes on 6 Posts
Default

Just duct tape it
JRider is offline  
Old 09-19-2013, 03:52 PM
  #3  
Registered
Platinum Member
iTrader: (1)
 
Join Date: Mar 2009
Location: Cape Coral, Fl/LOTO
Posts: 2,053
Likes: 0
Received 0 Likes on 0 Posts
Default

Somebody went crazy with the sawzall.
314joey is offline  
Old 09-19-2013, 03:54 PM
  #4  
Neno the mind boggler
VIP Member
iTrader: (1)
 
glassdave's Avatar
 
Join Date: Sep 2001
Location: toledo oh
Posts: 13,064
Received 259 Likes on 92 Posts
Default

definitely epoxy for that repair . . .



(it is certainly repairable to )
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
glassdave is offline  
Old 09-19-2013, 04:19 PM
  #5  
Registered
 
Join Date: Dec 2009
Location: Wyandotte, MI
Posts: 2,480
Likes: 0
Received 2 Likes on 2 Posts
Default

2 cans of Flex Seal should do the trick..... https://www.tryflexseal.com/

Obviously I would never be a good theif. I could never bring myself to cutting the back end of a boat off, with a saws-all, to steal the motors and drives...
low_psi is offline  
Old 09-19-2013, 04:20 PM
  #6  
Registered
 
Join Date: Sep 2006
Location: Cedar Rapids Iowa, LOTO, Cape Coral Fl.
Posts: 1,470
Received 412 Likes on 173 Posts
Default

I bet that the thief sawed it because the lacked the ability or the "chop shop" did not have the ceiling height to pull the motors how one would traditionally do it.. Allot easier to roll the motors out with the hull on the ground and cut just in front of them.

Focking criminals! Unbelievable........
36Tango is offline  
Old 09-19-2013, 04:23 PM
  #7  
Registered
 
Join Date: Dec 2009
Location: Wyandotte, MI
Posts: 2,480
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by low_psi
2 cans of Flex Seal should do the trick..... https://www.tryflexseal.com/

Obviously I would never be a good theif. I could never bring myself to cutting the back end of a boat off, with a saws-all, to steal the motors and drives...
Naaaaa. The Seam Seal would never hold up. How about a few rolls of "Fix It Tape". http://www.asseenontv.com/detail.php?p=296726&pa=sli
low_psi is offline  
Old 09-19-2013, 04:26 PM
  #8  
Forum Regulator
VIP Member
iTrader: (1)
 
Sydwayz's Avatar
 
Join Date: May 2001
Location: Worldwide
Posts: 23,811
Received 1,172 Likes on 511 Posts
Default

34' Hustler For Sale
Must be sold!
(Some rigging required)
Sydwayz is offline  
Old 09-19-2013, 06:11 PM
  #9  
Platinum Member
Platinum Member
iTrader: (1)
 
articfriends's Avatar
 
Join Date: Jun 2004
Location: frankenmuth michigan
Posts: 7,126
Received 784 Likes on 363 Posts
Default

I thought maybe it was from a bad divorce-judge ordered owner to split boat with his wife!!!!!!!!
articfriends is offline  
Old 09-19-2013, 06:12 PM
  #10  
Registered
Thread Starter
 
Join Date: Jan 2006
Location: St. Pete Beach, FL
Posts: 3,556
Received 553 Likes on 329 Posts
Default

He was going to add a step.
hogie roll is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.