Made the video but it is BIG, Who has some webspace???
#1
Registered
Thread Starter
Join Date: Aug 2001
Location: Boynton Beach FLORIDA!!!!
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
Made the video but it is BIG, Who has some webspace???
Made the MPEG file of the INITIAL run of the tub
Now I need to find some webspace somewhere
this thing is 15.9 megs
I made it in AVI format at 199 megs and compressed it to mpeg to 15.9
Anyone that can compress it more, Ill be happy to send it to you
or if anyone has webspace
Thanks
Jason
Now I need to find some webspace somewhere
this thing is 15.9 megs
I made it in AVI format at 199 megs and compressed it to mpeg to 15.9
Anyone that can compress it more, Ill be happy to send it to you
or if anyone has webspace
Thanks
Jason
#3
Registered
Thread Starter
Join Date: Aug 2001
Location: Boynton Beach FLORIDA!!!!
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
I just emailed the zip file to nort (Phantom Chaos)
He has some web space he is going to put it up on temporarily.
Check it when he posts up a link
Not too bad
Backfired when I went to start it up, then it ran fine, backfired once while out but im going to recheck the timing on them both before putting engine hatch and back seat in to make sure she is okay.
Now the steering, that Ill have to figure out why it is so tight and the shifters for the bravo's are both tight as well.
Lower idle RPM's from 1000 down to 700.
other than that, need to change oil and filters and install back seats and engine hatch cover
she runs well
only had it up to about 3000 RPM's max though cause im taking it easy on it for now.
No WOT runs or anything nuts
Im pleased with the results so far, No complaints
Jason
He has some web space he is going to put it up on temporarily.
Check it when he posts up a link
Not too bad
Backfired when I went to start it up, then it ran fine, backfired once while out but im going to recheck the timing on them both before putting engine hatch and back seat in to make sure she is okay.
Now the steering, that Ill have to figure out why it is so tight and the shifters for the bravo's are both tight as well.
Lower idle RPM's from 1000 down to 700.
other than that, need to change oil and filters and install back seats and engine hatch cover
she runs well
only had it up to about 3000 RPM's max though cause im taking it easy on it for now.
No WOT runs or anything nuts
Im pleased with the results so far, No complaints
Jason
#4
Registered
i did this with my crash video.
mpeg will nbot wortk for everyone TRUST ME
I went through it and had a headache..
compress it to divx format.
then you can post something like this;
http://users.rcn.com/beerock/JACK%20...20CRASH!!!.avi
you must have DIVX 4.02 codec or better.......
get it here if you dont have it...
http://www.divx.com/divx/index.php
other wise it will play but you wont see the video.
(download it, its worth seeing the video)
you guys might want to check out the video...
its me on my race bike......
mpeg will nbot wortk for everyone TRUST ME
I went through it and had a headache..
compress it to divx format.
then you can post something like this;
http://users.rcn.com/beerock/JACK%20...20CRASH!!!.avi
you must have DIVX 4.02 codec or better.......
get it here if you dont have it...
http://www.divx.com/divx/index.php
other wise it will play but you wont see the video.
(download it, its worth seeing the video)
you guys might want to check out the video...
its me on my race bike......
Last edited by beerock; 08-06-2002 at 12:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Poorsche
General Q & A
23
05-31-2006 06:37 AM
PhantomChaos
General Boating Discussion
14
12-07-2004 08:53 AM