Wellcraft 23 Nova Spyder
#71
Registered
Join Date: May 2007
Location: Tinley Park, Illinois
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
We just picked up this Wellcraft Nova, our boat now has a 454 and runs 56 with a 25 4 blade, will this boat handle a 750 to 800 hp blower motor and what speed can we expect ? or are we better off to drop in a 525 ?? i know we will need to have a spare bravo in the pick up just in case .
thnx guys BOB & BRYAN
thnx guys BOB & BRYAN
#72
Banned
The question is does anyone have one of these with a BLOWN 540 750 to 800 hp and what speeds and will the boat handle the power? the boat is clean and in great shape but need to kick it up a couples digits
#73
Registered
Join Date: Jul 2011
Location: blanco,tx
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi Guys and Gals
I'm new to this site and am buying a 1995 nova w/a MCM454MAG MPI.What can you tell me about this motor as I know nothing about it.HP how do they run?performance add ons etc.Has bolster seats, no trim tabs,thats all I know till I get it home.
Thanks Rusty
I'm new to this site and am buying a 1995 nova w/a MCM454MAG MPI.What can you tell me about this motor as I know nothing about it.HP how do they run?performance add ons etc.Has bolster seats, no trim tabs,thats all I know till I get it home.
Thanks Rusty
#74
Gold Member
Gold Member
Hi Guys and Gals
I'm new to this site and am buying a 1995 nova w/a MCM454MAG MPI.What can you tell me about this motor as I know nothing about it.HP how do they run?performance add ons etc.Has bolster seats, no trim tabs,thats all I know till I get it home.
Thanks Rusty
I'm new to this site and am buying a 1995 nova w/a MCM454MAG MPI.What can you tell me about this motor as I know nothing about it.HP how do they run?performance add ons etc.Has bolster seats, no trim tabs,thats all I know till I get it home.
Thanks Rusty
#75
Registered
Join Date: Jun 2005
Location: OHIO/Maryland
Posts: 1,783
Likes: 0
Received 0 Likes
on
0 Posts
#76
Registered
I guess I'll bring this old thread back to life! I'm thinking about picking up a cheap project near me. I haven't owned an I/O boat since 1988...but, there is a 1993 Nova Spyder 230 with a 454 Magnum/Bravo One on an aluminum I-Beam trailer that is enticing me. The boat hasn't run in 10 years. Supposedly, the motor has a new starter and carb. The vinyl on the rear bench and hatch will need some love, but overall, the pictures of the boat look pretty solid. I may go look at it tomorrow morning. I would anticipate that the boat should run 60-63 with the 385hp Magnum if propped correctly...
#77
Registered
Well, for $1500 I couldn
’t say no. It’s a 1992 Spyder 230 with a 454 Magnum/Bravo One on a tandem axle aluminum trailer. The rear seat and engine hatch are going to need a lot of love, but for a 20 year old boat, it’s in decent shape..pictures to follow as I clean her up!
’t say no. It’s a 1992 Spyder 230 with a 454 Magnum/Bravo One on a tandem axle aluminum trailer. The rear seat and engine hatch are going to need a lot of love, but for a 20 year old boat, it’s in decent shape..pictures to follow as I clean her up!
Last edited by JUPITER PULSARE; 03-08-2022 at 12:47 PM.
The following 5 users liked this post by JUPITER PULSARE:
larslindroth (03-07-2022), resurrected (03-07-2022), SB (06-12-2022), Smarty (03-06-2022), the deep (07-03-2022)
#78
Registered
After some much needed and neglected maintenance, I got my Spyder on the water after the prior owner let it sit for 11 years! I replaced the thermostat housing, thermostat, raw water pump impeller, circulation pump, fuel pump, fuel/water separator filter, belts, motor oil, oil filter and drive oil. I also did an initial wet sand and high speed buff and will be repeating that process again to get the gel coat to really shine. It’s a great riding boat and spacious for only 23’ of length!
The following 3 users liked this post by JUPITER PULSARE:
The following users liked this post:
JUPITER PULSARE (06-12-2022)
#80
Registered
Has an awesome day on the 23’ Spyder today. Now that I’m confident in the motor and drive, I took it for a long run today. From Jupiter Inlet to St Lucie Inlet and back. Made the round trip with a stop for lunch at The Twisted Tuna and an after lunch stop at the Stuart Sandbar to visit friends. The Spyder ran flawlessly and handled great!
Last edited by JUPITER PULSARE; 07-03-2022 at 10:26 PM. Reason: Spelling
The following 2 users liked this post by JUPITER PULSARE:
resurrected (07-04-2022), the deep (07-03-2022)