Building the new/old school larry smith 26
#1
Platinum Member
Platinum Member
Thread Starter
Building the new/old school larry smith 26
We finally finished waxing the molds 10 coats. Waiting on supplies should be here today. Should be spraying gel on Monday will post some pics as soon as we start lamination.
#3
Registered
Join Date: Oct 2000
Location: Gorham, Maine
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Thats great news, is this that same hull that Archer Marine raced in A class years ago. There was a red hull I think that set the kilo record in the class for a while. And didn't you guys put a blackhawk drive on and run 93mph. Is this a straight 24 degree hull with no pad, steps etc. Good luck with the build, looking forward to seeing the progress
#4
Platinum Member
Platinum Member
Thread Starter
Yes same boat Nigel and I raced back in the day. It has a double strake right at the keel that goes about 10 ft forward to make a nice little delta pad no steps didn't like the factory one boats with step was a much better boat without steps. The laminate is vinyl ester resin cored and vacuumed bagged with foam bulkheads and floor for weight. Should be a nice strong and light layup. We are setting the first boat up to run a Bravo or Blackhawk I still have one of the Blackhawks that I ran in the 90s . Just have to find some props sold all of the old props. Almost did the first boat red like the old race boat but decided to go with white. Will do some old school paint job!
#6
Platinum Member
Platinum Member
Thread Starter