DCB M35 in Classifieds (Teague)
#13
Registered
#14
Registered
Join Date: Sep 2011
Location: cali/az
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
there is to many zero's on add..
so the boat was flipped half sunk and never tore apart or dryed out.. so it now delaminated ...
just my .02 but parting out would seem to be the best.. you can fix it paint it but its got a tag on it for life.. cant hide that boat..
so the boat was flipped half sunk and never tore apart or dryed out.. so it now delaminated ...
just my .02 but parting out would seem to be the best.. you can fix it paint it but its got a tag on it for life.. cant hide that boat..
#15
Registered
Not defending anyone's actions in the videos I saw, but I don't recall watching a "race" when viewing the video.
Buck
#16
VIP Member
VIP Member
The 41 Dcb did not cut Bo Rising off.He ran up there tail with his trim WAY to high.He caused his own accident.
#17
VIP Member
VIP Member
We were still running with the pace boat when the 2 DCBs thought they needed to leave before everybody else.The 41 left first,then the 35 of Bo Rising and the rest is history.The end of poker runs as you will see at the next DS.
#18
Registered
Well- suppose to not, and actually are two different things... Men and their competitiveness is what you end up with, weather you like it or not, that IS what going on, everyone knows it too!!
#19
yes but its hard to run up the transom of a boat that is not there. the 35 seemed to get sucked into the wake of the 41 that crossed in front of it. all this happened at what speeds?100-110 as the video was shot from a ribinson helicopter and they are not a fast bird. so to flip at that slow of a speed required more than a little help.
#20
Registered
yes but its hard to run up the transom of a boat that is not there. the 35 seemed to get sucked into the wake of the 41 that crossed in front of it. all this happened at what speeds?100-110 as the video was shot from a ribinson helicopter and they are not a fast bird. so to flip at that slow of a speed required more than a little help.
Skater 40 was right there for it!!
Last edited by precisiondetails; 02-09-2014 at 10:34 PM.