Nyes Engines? Anyone familiar with them?
#1
Registered
Thread Starter
Join Date: Apr 2010
Location: Lake Travis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Nyes Engines? Anyone familiar with them?
This seems cheap
http://www.nyesautomotive.net/540__Marine.html
540 Built for the demands of Marine use
650 HP on pump gas
4.5" Bore
4.25" Stroke
10.5 Compression
$9,450.00
650 HP on pump gas
4.5" Bore
4.25" Stroke
10.5 Compression
$9,450.00
The big block 540 Marine engine starts with a Dart Big M block that we fully machine on our Rottler cnc machine, diamond hone, paint, pressure test. We then fill it up with all new parts.
• Eagle 4340 forged crankshaft
• Eagle 4340 forged h beam rods
• SRP Small dome profile pistons
• Mahle file fit rings
• Clevite H series bearings
• Erson hydraulic roller cam and lifters
• Double row billet timing set
• Aluminum timing cover
• Billet pointer
• SFI approved balancer
• 168 tooth sfi flexplate
• Melling oil pump
• Moroso oil pan and pickup
• Felpro gaskets
• 320 cc Aluminum heads with severe duty stainless Intake valves, Inconel Exhaust valves, heavy duty springs, locks, retainers, rocker studs, guide plates.
• .080 wall hardened pushrods
• Aluminum roller rocker arms
• Polished aluminum logo valve covers
• Professional products intake
• Eagle 4340 forged crankshaft
• Eagle 4340 forged h beam rods
• SRP Small dome profile pistons
• Mahle file fit rings
• Clevite H series bearings
• Erson hydraulic roller cam and lifters
• Double row billet timing set
• Aluminum timing cover
• Billet pointer
• SFI approved balancer
• 168 tooth sfi flexplate
• Melling oil pump
• Moroso oil pan and pickup
• Felpro gaskets
• 320 cc Aluminum heads with severe duty stainless Intake valves, Inconel Exhaust valves, heavy duty springs, locks, retainers, rocker studs, guide plates.
• .080 wall hardened pushrods
• Aluminum roller rocker arms
• Polished aluminum logo valve covers
• Professional products intake