MO Boaters, Who's your marina?
02-19-2005, 03:25 PM
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Palm City, FL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
MO Boaters, Who's your marina?
TIme to replace valvesprings on HP500s and I am not wanting to tackle it myself. Who do you guys recommend in the St. Louis or LOTO area?
Anyone use Competition marine in St. Charles?
CTA
Anyone use Competition marine in St. Charles?
CTA
Gold Member
02-19-2005, 03:36 PM
#3
Charter Member #737
Charter Member
Re: MO Boaters, Who's your marina?
bilgerat a member here who owns Lake Shores at around the 8mm.
VIP Member
02-23-2005, 01:23 PM
#9
Charter Member #94
Charter Member
Re: MO Boaters, Who's your marina?
CTAdams,
Do you live in the St. Louis area? If so, I don't know anything about local folks for you. You have already heard some of the top names at the lake. The top of the list would be Rueben at CPR. NOT cheap, but lots of experience. A VERY close second, (arguably first for engine work) would be Gene at Lightning Performance. LOTS of experience, Not cheap, but knows motors. Not far away would be Jason and Mike<?> at Lakeshores Marine. They may not have the mega years experience but have been playing with a lot of high performance horsepowere, (including blowermotors), for the last 15 years or so. Jason has won his class in the Shootout the last few years in a ProCharged 33 Scarab that they built and continue to play with. These guys would probably be the most reasonably priced and as all the above, would stand behind their work. I've replaced my own valve springs a couple of times. The job may not be brain surgery but can screw things up bad if you don't know what you're doing. If you are closer to the KC area than St. Louis, get with me and I can set you up. Otherwise, you can't go wrong with any of the previously mentioned.
Do you live in the St. Louis area? If so, I don't know anything about local folks for you. You have already heard some of the top names at the lake. The top of the list would be Rueben at CPR. NOT cheap, but lots of experience. A VERY close second, (arguably first for engine work) would be Gene at Lightning Performance. LOTS of experience, Not cheap, but knows motors. Not far away would be Jason and Mike<?> at Lakeshores Marine. They may not have the mega years experience but have been playing with a lot of high performance horsepowere, (including blowermotors), for the last 15 years or so. Jason has won his class in the Shootout the last few years in a ProCharged 33 Scarab that they built and continue to play with. These guys would probably be the most reasonably priced and as all the above, would stand behind their work. I've replaced my own valve springs a couple of times. The job may not be brain surgery but can screw things up bad if you don't know what you're doing. If you are closer to the KC area than St. Louis, get with me and I can set you up. Otherwise, you can't go wrong with any of the previously mentioned.
__________________
Abby-someone
Abby-someone
02-23-2005, 01:52 PM
#10
Registered
Thread Starter
Join Date: Oct 2001
Location: Palm City, FL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: MO Boaters, Who's your marina?
Thanks for the info Gordo. I am closer to St. Louis than KC. I've actually rebuilt several engines but I just don't have the time or patience to do the job correctly in the tight quarters of my bilge. The last thing I want is to pack up the family, go the the lake and find out that I did something wrong and have to work on the boat all weekend. So I will be looking into some of your suggestions.
Thanks again everyone,
CTA
Thanks again everyone,
CTA
