Smart Craft VesselView Question
#12
Registered
Thread Starter
#13
Registered
Thread Starter
I'm still having this issue (haven't taken to dealer yet). I just installed a new vessel view race edition and when going through the setup, I called the center engine "center". Should I scroll through and see if there is a stbd 2 option, which is what it was originally called?
I got into the dash and unplugged the white rectangular Mercury racing boxes to see if that was it but even when unplugging the port and stbd engine, nothing changed on the vessel view display. The vessel view manual has 0 troubleshooting section. Is there a fuse on the engine somewhere specifically for the smartcraft?
I got into the dash and unplugged the white rectangular Mercury racing boxes to see if that was it but even when unplugging the port and stbd engine, nothing changed on the vessel view display. The vessel view manual has 0 troubleshooting section. Is there a fuse on the engine somewhere specifically for the smartcraft?
#15
I had that problem when I was doing my center engine also. tThe center motor has to be set to either port 2 or starboard 2. Its been a while and I cant remember which one. So just try one and if it doesn't work, then try the other.