454 magnum rebuild
#1
Registered
Thread Starter
Join Date: Jun 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
454 magnum rebuild
I am boring out a set of 89" 454 mags out of my SR1 Formula engines was getting little weak but still running
Looking for info on cams and compression upgrades that's worked well on these motors and still stay on 93 pump gas. Thanks for any info
Looking for info on cams and compression upgrades that's worked well on these motors and still stay on 93 pump gas. Thanks for any info
#2
there are like a million threads on 365 MAG rebuilds in the tech section heck three or for of 'em are mine lol
Look in Gen Q&A or the Do it Youself section just search 365 mag or something. heres a couple to get ya started it is probably one of the most popular topics I have a couple gen 4 and 5's id like to go through some day. The mag is a great base to start with
And welcome to the site
http://www.offshoreonly.com/forums/g...up-grades.html
http://www.offshoreonly.com/forums/g...-camshaft.html
actual searches
http://www.offshoreonly.com/forums/s...archid=2321869
http://www.offshoreonly.com/forums/s...archid=2321877
Look in Gen Q&A or the Do it Youself section just search 365 mag or something. heres a couple to get ya started it is probably one of the most popular topics I have a couple gen 4 and 5's id like to go through some day. The mag is a great base to start with
And welcome to the site
http://www.offshoreonly.com/forums/g...up-grades.html
http://www.offshoreonly.com/forums/g...-camshaft.html
actual searches
http://www.offshoreonly.com/forums/s...archid=2321869
http://www.offshoreonly.com/forums/s...archid=2321877
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 07-01-2015 at 12:48 PM.