New-Model Project Update: First 32 Phoenix In The Mold
#11
Registered
.
what's next?
shoot chop strand glass and resin to build the deck mold!
.
what's next?
shoot chop strand glass and resin to build the deck mold!
.
Last edited by noli; 07-24-2016 at 08:44 PM.
#12
Registered
.
.
https://www.facebook.com/SmartMarineService/
shooting Chop strand glass and resin to form the deck mold. This will quickly build volume for the mold. Very exciting times!
I'm guessing that the race boat will enter the SBI race in Clearwater, FL on Sept 30 as a shakedown race-run
Then be in the world's in Key West on Nov 6th
My personal guess, I claim to know nothing about P32 and SM's schedule, just pure speculation on my part
.
https://www.facebook.com/SmartMarineService/
shooting Chop strand glass and resin to form the deck mold. This will quickly build volume for the mold. Very exciting times!
I'm guessing that the race boat will enter the SBI race in Clearwater, FL on Sept 30 as a shakedown race-run
Then be in the world's in Key West on Nov 6th
My personal guess, I claim to know nothing about P32 and SM's schedule, just pure speculation on my part
Last edited by noli; 07-24-2016 at 09:09 PM.
#13
Registered
.
https://www.facebook.com/SmartMarineService/videos
The picture below is a Phoenix 32 hull bottom with bulkheads in place, sitting on two shop dollies.
Vacuum Resin Infusion (VRI) and lightweight composite materials is proving to be a weight saving, stronger build solution for the Orlando-FL based builder
Two guys lifting the bow off of the front dolly
https://www.facebook.com/SmartMarineService/videos
The picture below is a Phoenix 32 hull bottom with bulkheads in place, sitting on two shop dollies.
Vacuum Resin Infusion (VRI) and lightweight composite materials is proving to be a weight saving, stronger build solution for the Orlando-FL based builder
Two guys lifting the bow off of the front dolly
Last edited by noli; 08-06-2016 at 05:32 AM.
#15
Registered
.
https://www.facebook.com/SmartMarineService/
Deck mold is complete
the race boat (plug) will return to the race circuit I believe
The hull bottom awaiting its deck
https://www.facebook.com/SmartMarineService/
Deck mold is complete
the race boat (plug) will return to the race circuit I believe
The hull bottom awaiting its deck
Last edited by noli; 08-08-2016 at 09:55 PM.
#16
Registered
#17
Registered
#18
Registered
.
the deck's skin coat application is progressing nicely. reinforcements on the lower areas of the canopy is being added
the deck is getting close for its Vacuum Resin Infusion (VRI), a closed molding process
Notice the 32XR race hull in the background. That too is awaiting its VRI.....busy busy!
the deck's skin coat application is progressing nicely. reinforcements on the lower areas of the canopy is being added
the deck is getting close for its Vacuum Resin Infusion (VRI), a closed molding process
Notice the 32XR race hull in the background. That too is awaiting its VRI.....busy busy!
Last edited by noli; 08-26-2016 at 09:50 PM.
#19
Registered
#20
Registered