5/8 Fuel Pick Up
#1
5/8 Fuel Pick Up
I can not remember the company that I order 5 /8 inch fuel pick ups to install in the fuel tanks as it was a couple of years ago. Also last year I ordered 1/2 inch fuel pick ups from another company and can not find the invoice to call them asking if they have 5/8 as well. Anyone know who has these and I will need to cut to length most likely also just an FYI will be using # 10 AN fuel line connections to the pick up. Thanks for the help.
Last edited by BUP; 09-23-2016 at 11:24 PM.
#3
Registered
I had a lot of trouble finding one until I googled diesel fuel marine pick up. Don't remember where I eventually found it.
#4
Platinum Member
Platinum Member
iTrader: (6)
Try a company out of edgewater Fl called Centroid Products. .Tel # 386-423-3574
#5
Registered
Join Date: Dec 2002
Location: Kankakee Illinois
Posts: 3,705
Likes: 0
Received 0 Likes
on
0 Posts
If you are going to weld them in the tank, I' sure that a section of aluminum tube, or pipe if you want threads on one end, would work just fine. I'm pretty sure that whomever is up to the task of properly welding them to the tank would find it to be no problem making them.