mod58

Having some electrical issues with the 9 pin plugs not cooperating with my merc engine harness.Boat was born with 496's and the original owner swapped in carbed blower motors and had the plus changed to 9 pins.But they must not be wired the same because i smoked a MSD box on the port motor and no key on power to the box on the other and a few to many pins are hot with the key on..Had both motors on the dyno with no problems so Im pretty sure its not the engine harness.I have no patients when it comes to electrical issues so any referrals in or around South Jersey would be greatly appreciated,Thanks!!!!!!!!!!

Tom A.

Toms river Area - Marine Unlimited

class6

I have a diagram of what it should be and color wire codes. i just can't figure out how to post it. text me if you want it 845-629-1175

mod58

That would be great thanks!!!!!

mod58

Thanks CLASS6! Had two wires that were backwards,Switched them and it sounds great.Can't wait to let her eat!!! https://www.facebook.com/search/top/?q=steve%20bertino https://www.facebook.com/search/top/?q=steve%20bertino