502 oil capacity with relocated oil filter
#1
Registered
Thread Starter
Join Date: May 2017
Location: Northern ohio
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
502 oil capacity with relocated oil filter
What should capacity be? New purchase and when cold and level ground dipstick shows about 2 inches above full mark? I took to local dealer to get shift cable adjusted and they told me it didn't have any oil showing on dipstick....then they tell me they checked it running. lol I know right....thanks
#2
Platinum Member
Platinum Member
iTrader: (6)
I think thats the wrong dip stick, unless its way over full, I think a gen 6 502 has an 8 or 9 qrt + the filter, lines and cooler
Checking it while running ?? find a different shop......
Checking it while running ?? find a different shop......
Last edited by F-2 Speedy; 06-09-2017 at 04:45 PM.
#3
Registered
iTrader: (1)
Actually , the best time to check it is when airborn just after launching off a big wave. If you land before you see the oil level, do it again.
#6
Charter Member # 55
Charter Member
Is it a Merc 502???? If so, it holds 8 qts if 100% empty. 7.5 qts is what gets me to the full mark when I do an oil change on my 502mpi's.
Check the oil with engine level. This is the same as it would be sitting at rest in the water.
Check the oil with engine level. This is the same as it would be sitting at rest in the water.