kama drives?
#3
Registered
Don't be scared ! Nothing to it ! I had them on my 402 formula . Take them apart when you get it and replace the bearings and seals . YOu can get them in any GOOD bearing place . (CHEAP)
IF the bearings come apart and brake the housing then you have to get in machined or fabricated like I did . (the hard way !)
Go throught it first . It's easy and worth it ! Any quesions e-mail me . I have the manual on disc I can e-mail you back if you want ,just ask ! JOE
[email protected]
IF the bearings come apart and brake the housing then you have to get in machined or fabricated like I did . (the hard way !)
Go throught it first . It's easy and worth it ! Any quesions e-mail me . I have the manual on disc I can e-mail you back if you want ,just ask ! JOE
[email protected]
#4
Charter Member
Charter Member
Join Date: Feb 2001
Location: Gretna, Ne
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
What boot said. I rebuilt both of mine, it is very easy and the bearing and seals are off the shelf parts. None of the expensive Merc stuff. I have a manual I can send you if you like.
mike
mike
Thread
Thread Starter
Forum
Replies
Last Post
TeamPSI
General Q & A
7
03-31-2006 09:48 PM
Dean Ferry
General Boating Discussion
4
11-27-2002 08:09 AM