Dyno-I'm using a Garmin e-map unit. I spoke to Garmin about the availability of a patch cord with both power and output. The guy that I spoke with said that they used to carry them but were having a problem with them. It seems as if people were hooking up straight 12v (like I was going to-DOH!) and were frying the units. To save the consumer from themselves, the only way you can get external power is with a cig lighter attachment.
The tech was nice enough to point me to a company that made the correct patch cable. I don't recall the name, but I can dig out at home-if you guys want it. BTW-I noticed that Gaffrig and Nordskog came out with the GPS speeds at the exact same time. Coincidence? I suspect there is only one supplier. |
Very True Wally....
I am just so used to going straight to the factory I didn't think it through at the time. I won't do it again though.:D |
Why would you want a GPS speedo??? I like the readings of my "normal" speedo.
If a passenger wants to know how fast we are going, I just point at the speedo. They don't know that it lies on the high side by about 4 mph! :D |
4!!!!! **** mines off by at least 10!!!
|
Bayley & Dave M
Bayley, I have a 168 Garmin plus the GPS speedo, the speedo only wiggles when I flip the recall thingy but won't show speed at all, maybe what you said above is my problem, so if ya could say it in english :confused: or just so I could understand it, maybe I could get mine to work like it should.
Dave M, my 168 Garmin in the menu section has a option for sm, med, lrg, and x lrg, so I can make my speed really big so it's easy to see, so maybe just check your settings and you might get some bigger numbers. |
here is how my garmin 12CX gps is wired to my gaffrig analog gps speedo using the data/power cable from gaffrig.
the brown wire from the gps data/power cable is connected to the center wire on the smaller connector on the back of the speedo. this wire is white. the white wire on the gps data/power cable is not needed for the speedo. speedo large connector red +12V black ground violet center position of clear/recall switch gray recall side of switch orange clear side of switch speedo small connector center white lead <--> brown lead from gps power/data cable gps setup screen interface page None/NMEA NMEA 0183 2.0 4800 Baud |
All times are GMT -5. The time now is 07:09 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.