Too old
where do you get that for 139.00. I think that will fit my mtc jack. |
Originally posted by Downtown42 I'm interested. Depending on cost, SS maybe. |
Cord
What I am looking for is something to mount to a jack and can tilt to help put the drives on and off with. Is what you are looking at just a stand or can it be used to help with the heavy work? |
1 Attachment(s)
Here is my homebuilt stand. Next addition is wheels.
|
1 Attachment(s)
2
|
B1 Drive slips in either direction, and upside down, (for painting lower), and sturdy enough to stand on.
Remember, lifting/lowering the tongue of your trailer will move your transom for correct position when installing/de-installing. |
Originally posted by Scarab105 Cord What I am looking for is something to mount to a jack and can tilt to help put the drives on and off with. Is what you are looking at just a stand or can it be used to help with the heavy work? I was just going to build a stand. I've seen the jack ones, but I've never really liked them. I just pick the dang thing up. |
:D
Have another attachment that goes into the engine stand, then the outdrive mount slides into it. As that attachment is rotated within the engine stand, the height of the drive chages for different boat heights. Works great and won't fall over. |
Originally posted by Scarab105 Cord What I am looking for is something to mount to a jack and can tilt to help put the drives on and off with. Is what you are looking at just a stand or can it be used to help with the heavy work? |
1 Attachment(s)
Ok.. here's my idea.
|
All times are GMT -5. The time now is 01:06 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.