IMCO box on ebay
#3
Charter Member
Charter Member
Join Date: Oct 2000
Location: Central, Ohio USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Here's a link to their rams. Don't know if they have one long enough though. Your angle would have to change too.
http://www.imcomarine.com/pages/nev-...steering%20ram
http://www.imcomarine.com/pages/nev-...steering%20ram
#4
Platinum Member
Platinum Member
Nay, Sydwayz,
All you gotta do is buy an "ear" from IMCO to bolt on the side of the box (the holes positions are already dimpled on the box for it). You use your same ram.
All you gotta do is buy an "ear" from IMCO to bolt on the side of the box (the holes positions are already dimpled on the box for it). You use your same ram.
#6
Registered
Re: IMCO box on ebay
Originally posted by Cord
Somebody should bid this thing up a bit.
http://cgi.ebay.com/ebaymotors/ws/eB...category=26456
Somebody should bid this thing up a bit.
http://cgi.ebay.com/ebaymotors/ws/eB...category=26456
#8
Official OSO boat whore
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Yep, those are the arms. You drill and tap the box and then bolt them on. If you go with them, contact me and I'll give you a couple of pointers. They're not very expensive, less than 2 bills each. The nice thing is that they keep the centerline of the ram on the center of the gimble so your steering wont bind. These are also the same arms you would use on a Stellings box.