Hatches
#1
Registered
Thread Starter
Join Date: Oct 2002
Location: tropical Cleveland OH
Posts: 3,284
Likes: 0
Received 0 Likes
on
0 Posts
Hatches
I'm getting ready to paint the boat and I want to change the old hatches out, they are cracked and faded. Does anyone have a line on them, I'd like to get 2 that look good but I don't want to pay too much I sound like a progressive customer.
Thanks in advance.
Thanks in advance.
#4
Platinum Member
Platinum Member
Hatches
I have two deck hatches. They have Alum. divider bars. They are off a 1987 Scarab. They are in great shape. $300 for the pair. I will be in Toledo, OH this weekend if you want to see them. Call my cell if interested. 214 632 0798.
#5
Platinum Member
Platinum Member
#6
Registered
Thread Starter
Join Date: Oct 2002
Location: tropical Cleveland OH
Posts: 3,284
Likes: 0
Received 0 Likes
on
0 Posts
BF: Thanks I'll let you know.
BajaDaze: figures, the site is down I'll check it later.
JJ:I may use your balsa idea for engine hatches also.
Thanks for the replies.
Martin.
BajaDaze: figures, the site is down I'll check it later.
JJ:I may use your balsa idea for engine hatches also.
Thanks for the replies.
Martin.
#7
Platinum Member
Platinum Member
You're right...It was working before. Figures.
Anyway, on a side note, I was thinking about what Jesse was saying about engine hatches. Find youself some 1.50" thick Honeycomb panels. They are expensive new, but like Jesse mentioned, there's got to be some scrap laying around in aviation junkyards. They are incredibly strong and very lightweight. Wrap them in padding and upholstery and you have a very light hatch.
Anyway, on a side note, I was thinking about what Jesse was saying about engine hatches. Find youself some 1.50" thick Honeycomb panels. They are expensive new, but like Jesse mentioned, there's got to be some scrap laying around in aviation junkyards. They are incredibly strong and very lightweight. Wrap them in padding and upholstery and you have a very light hatch.
#8
Registered
Thread Starter
Join Date: Oct 2002
Location: tropical Cleveland OH
Posts: 3,284
Likes: 0
Received 0 Likes
on
0 Posts
That may work, I still have to do some measurements cause I now have the two hatches that part in the middle but they wont clear the blower that I'm putting on so after I put the scoop on I may make it a single hatch that opens in the front.