More drive??
04-22-2003, 02:16 PM
#1
Registered
Thread Starter
Join Date: Sep 2002
Location: Clearwater, Florida
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
More drive??
My thanks to those who responded to my last?.
Drive is 1990 OMC Cobra. In my haste to check what was advised, I removed the wrong screw 1st. The screw I originally removed, is on the side of the drive. The highest one on the left (looking from the rear). My questions are:
1 Should water have pored out of that hole once the scre was removed?
2 How can I get the screw back in? The threaded part on the inside has dropped and is laying on it's side. I can lift it with a small screw driver. But, it imediately drops back down.
Drive is 1990 OMC Cobra. In my haste to check what was advised, I removed the wrong screw 1st. The screw I originally removed, is on the side of the drive. The highest one on the left (looking from the rear). My questions are:
1 Should water have pored out of that hole once the scre was removed?
2 How can I get the screw back in? The threaded part on the inside has dropped and is laying on it's side. I can lift it with a small screw driver. But, it imediately drops back down.
Thread
Thread Starter
Forum
Replies
Last Post
Canada Jeff
Drives and Lower Units
10
07-19-2007 02:38 PM
thayes11
General Q & A
0
10-02-2005 12:36 PM
Velocity Tom
General Boating Discussion
4
07-16-2003 10:13 AM
panteraracin
General Q & A
3
02-07-2002 10:36 PM
