Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Aaaaagggghhhhh!!!!!! (https://www.offshoreonly.com/forums/general-boating-discussion/50257-aaaaagggghhhhh.html)

Crazyhorse 05-18-2003 09:23 PM

Hey Mike, you want I should drive the truck so's you can wrench on it while we're on the road?

Waterfoul 05-18-2003 09:33 PM

LOL Crazyhorse!!! Why don't you loan me the dually for the week so I can save some $$ on fuel towing it down there!!! :D

Cord 05-19-2003 10:48 AM


Originally posted by Griff
Get up early and call CPPerformance. Have them overnight it and it will be there by Tues afternoon.

I'm on it! But if only it was as simple as adding a pickup! You need the shutoff valve (no vacuum break so a blown hose will sink the boat), a npt to barb adapter, and a block off plate for the old fitting. Plus it's alot of work in a tight oilly bilge away from home. Oh, how fun!

Chart 05-19-2003 12:01 PM

Got my engine and trany back in, but not dressed out, before having to take it to the upholstry shop, where it is now. The only hope of the new cockpit being ready for Memorial day was to hold off the mechanical repairs. I hope to pick up the boat thursday, dress and aline the engine, AND replace the *^$#( bellow that caused the whole pull-the-engine problem. Nervous about dragging it to LOTO without first starting it, but it ran great last fall. See ya there.

Griff 05-19-2003 11:25 PM


Originally posted by Cord
I'm on it! But if only it was as simple as adding a pickup! You need the shutoff valve (no vacuum break so a blown hose will sink the boat), a npt to barb adapter, and a block off plate for the old fitting. Plus it's alot of work in a tight oilly bilge away from home. Oh, how fun!
I nevr thought about the valve. I have a hull mounted pick up, but never looked that closely at the plumbing. Not even sure it has a valve. Water still flows through my drive from the water pressure. I dump it out side next to the bilge pump dump.


All times are GMT -5. The time now is 08:07 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.