Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Death Of A Class! Feedback needed!! (https://www.offshoreonly.com/forums/general-boating-discussion/52289-death-class-feedback-needed.html)

LubeJobs42 06-13-2003 05:51 PM


Originally posted by Too Old
hmmmm......

And here I thought only the APBA got the negative press here on OSO.

If the situation as described weren't so pathetic, I'd say it was refreshing to hear something negative about an organization other than the APBA.

Reparations? The heck with reparations. I'd just load up and race somewhere else. If that meant P-Class, so be it.

Unfortunatly, there is no other place for us to race. For another class we would need differant boats.

xracer 06-13-2003 06:26 PM

APBA did the same thing to a great class.But they are always doing that to racers. Since we can all remember when a class gets good,What a great time mess it UP!They did it in The modified class ,D-Class ETC...

46tomcat 06-13-2003 07:09 PM

Gino did you get the new boat yet.Thanks for stopping by in daytona. Tom

LubeJobs42 06-13-2003 09:28 PM

[QUOTE]Originally posted by Fever Mike
[B]

Originally posted by LubeJobs42
i would have gladly went to APBA but with all of the guys racing with the new 525's I don't have a chance with my 500 efis.

Lubejobs, don't think think you can't compete with HP 500 EFI or even the HP500 carb in Factory 2. The kilo holder is the Speedwear 38 Fountain and that boats has HP500 carbs!!!! APBA Offshore has differant minimum weights for the HP500 carb, efi and the HP525 to insure parity. It does work!
Take care, Mike Carter

It is true, the 525 guys need to be 500 lbs. heavier. 940 Hp vs 1050 hp is a 11% differance. 500 lbs added to an 8000 lb boat is a 6% differance. Truthfully it's not enough weight to compensate for the additional horse power. Now you have the new Skaters and Scisms with their 60 inch wide tunnels. they pack a lot more air then the Spectre, Motions or older Skaters. Also with the wide tunnels there X dimensions are totally differant then ours. That's why dirty duck is running 120 in the kilo. The only way any of us (Zipp Express, Fastboats.com, peppers, myself, etc) can compete is either A. Shell out $60,000 for new 525's, B. Buy a new boat or C. If APBA would let us 500 EFI guys raise our X dimensions.

LubeJobs42 06-13-2003 09:35 PM


Originally posted by 46tomcat
Gino did you get the new boat yet.Thanks for stopping by in daytona. Tom
Hey Tom, I sent you a private message. Talk to you soon.

Ron P 06-13-2003 09:59 PM

Lube Job, Come on up to NJ and run with OPA. We have a race next Sunday 6/22 in Seaside NJ. Run in our P1 class against old Skaters and motions.

Atlantic City is July 19 -20 This should be a big event.

http://offshoreperformanceassociation.com/

LubeJobs42 06-14-2003 09:08 AM


Originally posted by Ron P
Lube Job, Come on up to NJ and run with OPA. We have a race next Sunday 6/22 in Seaside NJ. Run in our P1 class against old Skaters and motions.

Atlantic City is July 19 -20 This should be a big event.

http://offshoreperformanceassociation.com/

How many boats usually show up for this class? It may be an option.

eMotiondriver 06-14-2003 10:41 AM

Maybe the best solution to all of this is simply eliminate SBI and the LLC and start fresh.

I like Shane's idea but put a organization together with racers on the board. And have a jury when caught cheating..

The 2 things people hate most are Lawyers and Promoters
__________________

Wazzup Racing 06-14-2003 02:44 PM

Lube Jobs
 
We have a race in Seaside Heights on the 21. P 1 class my suit you we have quite a few in that class. call me 732 920 3945, lets put something together, I have been trying to reach the InMotion boat as well if you have a # Ed

fountain1fan 06-14-2003 10:02 PM

shane and eman you have my vote !!!!!


All times are GMT -5. The time now is 08:30 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.