Don, Did you pick up the the dye I left at MD? Before you pour it in I would mix it with at least a half quart of motor oil and then pour it in. Since there is such a small amount of it, by mixing it with some more oil you will be sure it gets down in the pan right away. Otherwise, it may take a while before it gets mixed with the oil that is already there. If you have enough room to shine the black light in the area that you suspect the leak to be coming from it should show up as greenish-yellow streaks as soon as the oil gets warmed up good. I also have a small black light on a flexible shaft that I can loan you. It may allow you to get into a smaller area. Let me know how it goes. Good luck.