Offshoreonly.com - Wanted: Set of speedmaster props

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Wanted: Set of speedmaster props (https://www.offshoreonly.com/forums/general-boating-discussion/53587-wanted-set-speedmaster-props.html)

KenP	07-02-2003 08:31 AM

Wanted: Set of speedmaster props

Anyone have a set of 16 or 17 x 24,25,26 etc? Can be 3 or 4 blade 19 spline 6 inch hub for number 3 speedmaster.

KiloKat

07-02-2003 08:36 AM

Check with John Tomlinson @ TNT. 305-931-3157

Mbam	07-02-2003 09:07 AM

I have some,
954 545 8681

Cord	07-02-2003 09:27 AM

Believe it or not...there was a PAIR on ebay the other week. Went for $250.

DEVIL MAN

07-03-2003 12:39 PM

I have a pair in mint condition....three blade for a speedmaster drive...small shaft....17.5X28...just e-mail me if you are [email protected]

DMan

BURNSMAZZ

07-03-2003 01:49 PM

I need some too,I've been trying to find some 17.5x31 or even 32s with small shafts,and haven't had any luck.

X-Rated30

07-03-2003 02:00 PM

Ken:

I know you want a 6 inch hub, but don't worry about going to the short hub. I had a pair of bronze or brass (I forget which) spacers fabricated to go on behind the prop and in front of the nut so I could try a pair of 3-blades. Works fine. It was only about $40 to have them made. Not fre, but considering the 3-blade props cost about 1/3 as much as the 4-blades, it is cheap enough just to try a pair out.

P.S. -- Still had to go with the 4-blades.:rolleyes:

All times are GMT -5. The time now is 12:06 PM.