How fast before blowout??
07-10-2003, 03:32 AM
#1
Gold Member
Gold MemberThread Starter
How fast before blowout??
Hi!
I will try out an experiment next year - adding another Promax 300 (SVS) to my Phantom 25. We have measured and I have spoken to the builder, and it should be fine.
At this moment I have a torquemaster lower unit on my current engine. Current top speed is 76-78 mph. Expected top speed is 85-88 mph.
According to Merc Hi Performance the Torquemaster is safe into the low eighties. Should I swop to a nose coned unit? And if so - a Sportmaster with straight skeg or a Bobs nose coned unit (I have one spare). Which is fastest?
Have a nice summer!
Cheeers, Toffen G
I will try out an experiment next year - adding another Promax 300 (SVS) to my Phantom 25. We have measured and I have spoken to the builder, and it should be fine.
At this moment I have a torquemaster lower unit on my current engine. Current top speed is 76-78 mph. Expected top speed is 85-88 mph.
According to Merc Hi Performance the Torquemaster is safe into the low eighties. Should I swop to a nose coned unit? And if so - a Sportmaster with straight skeg or a Bobs nose coned unit (I have one spare). Which is fastest?
Have a nice summer!
Cheeers, Toffen G
07-10-2003, 06:22 PM
#2
Registered
Join Date: Dec 2002
Location: chesapeake bay md
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Toffen I am not sure about the Bobs unit but my stock 300pm sportmasters have seen over 109mph with no problem. Depends a lot on motor height. I do think you would be much better off If you could trade that 300pm for a pair of280hp 2.5s due to the size and weight of your boat . I know you have worked hard on this project and I wish you the best of luck.
Michael
Michael
