Bad Luck?
1 Attachment(s)
Seams like luck goes in spirts for me, bolth good and bad. Does any one else notice this? Rag's
|
1 Attachment(s)
the BBC in my burb
|
Pull that bad boy off, face it on a grinder or a plate, put a good gasket to it and party on............. also don't torgue it so tight 10/1 thats why it pushed out fluid !!! Good luck. :D :D
|
1 Attachment(s)
sorry guess I should have been more clear on what happened as I all ways face the cheap housings and use a thick papper gasket but this one now has a hole erodid in it after mabe 2500 miles and in 2 years time.:confused: Rag's
|
Thought I noticed something in the first picture! Wow that sucks. I had a crome unit I could never get seated. I finally put it on a level surface and it was bowed like crazy. I milled it lfat and never had another problem. Never saw a hole in one before...
|
1 Attachment(s)
The worts part is waiting 40 minutes for AAA to tow me 10 minutes :mad: guess I will buy a good one this time. Rag's :D
|
Buy a stock aluminum one and either polish it yourself or get it done. Nothing beats stock parts for durability.
|
looks like a little JBWELD and some dry time would have saved a tow :)
almost as good as duck tape would at least lasted 10 minutes sorry that it happened, at least it is a relitive enexpensive fix :) |
All times are GMT -5. The time now is 04:11 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.