25 MARTINI Boats ???? Need help
08-09-2003, 09:22 AM
#11
Registered
Join Date: Sep 2002
Location: Brussels, Ont. CAN. Landlocked between Lake Huron, Ontario and Erie
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
last pic showing new tabs. I used to have the Bennett dual-ram tabs on my Martini but wanted something a little more effective and aesthetically pleasing so I started building my own replacements for either the Bennett single ram or the dual-ram tab system. Measures 19" overall on the dual ram and made a world of difference. 15" overall on the single version.
If you need any more info drop me a line, I'll try to help any way I can. Thanks, Brian Kamrath
If you need any more info drop me a line, I'll try to help any way I can. Thanks, Brian Kamrath
Charter Member
08-09-2003, 05:11 PM
#13
VIP Member
VIP Member
She's a beauty!!
__________________
Gary H...
Gary H...
08-12-2003, 08:53 PM
#18
Registered
Martiniboat, very nice I see one one the river where I boat very nice ride. The trim tabs for bennet do you make them? price? Great work.
tha
mark
tha
mark
08-13-2003, 11:57 AM
#19
Registered
Join Date: Sep 2002
Location: Brussels, Ont. CAN. Landlocked between Lake Huron, Ontario and Erie
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
Twinn29- I hail from Brussels, Ont. I know, I know, where the he$$ is Brussels you ask,
It's about 2.5-3 hrs. W of Toronto.
Pantera- EXACTLY what I thought too. I couldn't see any differences. At least in photos from the net. I asked that question awhile ago. Apparently the Pantera folks say its not the same hull. I run a 22P Bravo1 up to 5200RPM.
Mark, thanks for the compliment. To answer your question, no, I'm not associated with Bennett at all. I'm just building a KOOL retrofit trim tab to replace the stock Bennett dual and single ram trim tab system. They bolt right up to the original mounts/holes.
Sincerely,
Brian Kamrath
P.S. Almost forgot, the price for the dual ram version in black is $399pr/CDN. $30 extra for ANY colour and I can match any sample that you may have. $379pr for single ram version. I'm 'holding' my prices down for this boating season so I can get things moving. They'll be going up in April.
It's about 2.5-3 hrs. W of Toronto.Pantera- EXACTLY what I thought too. I couldn't see any differences. At least in photos from the net. I asked that question awhile ago. Apparently the Pantera folks say its not the same hull. I run a 22P Bravo1 up to 5200RPM.
Mark, thanks for the compliment. To answer your question, no, I'm not associated with Bennett at all. I'm just building a KOOL retrofit trim tab to replace the stock Bennett dual and single ram trim tab system. They bolt right up to the original mounts/holes.
Sincerely,
Brian Kamrath
P.S. Almost forgot, the price for the dual ram version in black is $399pr/CDN. $30 extra for ANY colour and I can match any sample that you may have. $379pr for single ram version. I'm 'holding' my prices down for this boating season so I can get things moving. They'll be going up in April.
Last edited by martiniboat; 08-13-2003 at 12:03 PM.
