Bravo Low-water pick-up (Cup or Muffs)
#11
Charter Member#157
Charter Member
Join Date: Oct 2000
Location: Minneapolis, Mn, Usa
Posts: 1,859
Likes: 0
Received 3 Likes
on
3 Posts
Originally posted by convincor
http://www.perko.com/flushpro/flushpro_body.html
boatfix.com has them for $46.00
shop around, you might find cheaper.
Or, just pull the hose off from the inside at the transom assembly and stick a hose inside you intake hose.
you could put some fittings into the bottom of a 5 gallon pail and fill it with antifreeze.
http://www.perko.com/flushpro/flushpro_body.html
boatfix.com has them for $46.00
shop around, you might find cheaper.
Or, just pull the hose off from the inside at the transom assembly and stick a hose inside you intake hose.
you could put some fittings into the bottom of a 5 gallon pail and fill it with antifreeze.
I wanted to make sure the antifreeze dropped back into the drive water jackets. The Perko is spring loaded to allow in the water flushing.
I just went to Home depot and peicd some pvc connectors together. Want to finish it off with a transom setup to hook up from the outside.
Spent less the 25 for twins
__________________
This Cat is trying to keep up with the Big Dogs
This Cat is trying to keep up with the Big Dogs
#13
Registered
Thread Starter
Originally posted by convincor
http://www.perko.com/flushpro/flushpro_body.html
boatfix.com has them for $46.00
shop around, you might find cheaper.
Or, just pull the hose off from the inside at the transom assembly and stick a hose inside you intake hose.
you could put some fittings into the bottom of a 5 gallon pail and fill it with antifreeze.
http://www.perko.com/flushpro/flushpro_body.html
boatfix.com has them for $46.00
shop around, you might find cheaper.
Or, just pull the hose off from the inside at the transom assembly and stick a hose inside you intake hose.
you could put some fittings into the bottom of a 5 gallon pail and fill it with antifreeze.
This winter I plan on pulling the motors and while they are out I'll plumb a water outlet like what you guy's are talking about!!
Thanks!!
#14
Registered
Hey Brian
For that kinda dough, might as well go for a mounted hose fitting somewhere in the engine compartment or through the transom. Sonic installs them factory on the swim platform. Could not be slicker.
Is there a valve that shuts to prevent water from flowing back to the drive?
Next time you're in the River, call me. I'd like to see this set up.
Thread
Thread Starter
Forum
Replies
Last Post
Shah Mat
Drives and Lower Units
0
07-06-2007 07:31 AM