Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Need help finding Scarab parts (https://www.offshoreonly.com/forums/general-boating-discussion/67047-need-help-finding-scarab-parts.html)

jmeng 12-23-2003 08:42 PM

Need help finding Scarab Sport parts
 
I have an uncle that is looking at purchasing a '91 34' Scarab Super Sport center consol. The boat is missing both deck hatches and the three piece cabin door. Any idea where I could find replacements? Any and all help would be appreciated.

jmeng 12-25-2003 07:33 AM

ttt

RHC 12-25-2003 09:13 AM

Scarab Parts
 
When I was looking for parts ,,, we hooked up with Florida Tank and Marine ,,, they buy the old molds from Wellcraft and other companys ,,, then make the doors , windshields , and tanks for older boats ,,, I dont have there numbers but I am sure some one on the board will have it ... the products were ok,,, I had to do a little grinding to make them fit but it was better than starting from scratch.. Hope this helps ...

RHC

Mike J 12-25-2003 10:48 AM

Theres a bunch of door molds
and other types of molds in
storage in SoCal.
Not sure what is still worth
trying to make parts from.
Might check ARCHER MARINE in
Costa Mesa Calif. Guess they
are the NEW shop for Scarab.
Mike J.

Dales P-29 12-25-2003 10:58 AM

You can contact Wellcraft. They will probably make what you need if you are really desperate. The only problem as you know is they have killed the Scarab line. First you will get a song and dance about having to find the molds for a discontinued boat and then they will try to charge about 3 to 4 times more than it is worth to avoid doing the work. You probably ran into this already. Good Luck and if you find someone reasonable could you please post it.


All times are GMT -5. The time now is 09:04 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.