Maybe it doesn't. I thought the drive would fill with oil faster with the vent out, than venting through the bottle.:confused: :confused:

I would "think" that you'd be pushing the air back up the line for a complete fill. Of course you would have to loosen the cap or things would be interesting.

I would recommend you PM MAXX or Alfster they can make anything and it is top noch I bought a sterring system from them for my boat and it has been great!!
Todd

Cord,the plate on my hawk is from WPM and it is 3/8 thick

You have it all wrong Cord. The BH IS the poker run drive. The bravo is in the truck just incase the poker run wins :)

You need to have some 4 3/4 studs made to work with the wing plate too

Cord you should have said useful links that web site has been like that for years why even bother

Here is the Alfster bracket I had had some of the first ones and they used some of my design ideas

dont think you can find a stonger one it uses the drive mounting bolts as well as the two cap mounting bolts works great

klaw-any idea how much that bracket was?

Air-thanks for posting. I was hoping you would. Am I correct in assuming that a bravo bracket won't clear the bh rear cover? Those two bolts shown above, don't even exist, right?

If you wanna call Latham they have (2) 800 #'s one is 1-800-422-RAMS ask to speak to Tommy he will answer ANY questions you have. Latham is pricey but you get what you pay for and if it comes from there it works!

You assume correctly. it will not clear the back cover on the BH drive.

email alfster or Maxx
they will fix you up