Have any of you actually seen the 36 Skater open cockpit that John B is describing?. It dosen't sound like it !. I think that the undivided cabin in the Skater is roomier than the Nortech's. The cockpit in the Skater is also a lot larger as well. John SET THEM STRAIGHT!!!
|
i dont have the money for either but, i did board the mti last year in miami and i couldnt imagine a nicer boat.
|
Originally posted by ali-cat Have any of you actually seen the 36 Skater open cockpit that John B is describing?. It dosen't sound like it !. I think that the undivided cabin in the Skater is roomier than the Nortech's. The cockpit in the Skater is also a lot larger as well. John SET THEM STRAIGHT!!! |
ali- cat
1 Attachment(s)
The best picture I have is your boat. It shows the room and the quality. Your right, I don't think many people realize Skater has this deck mold for the 36.
gatoraid, about 114 gps best, usually 105-112 depending on load and atmospherics. |
36 Nor-tech interior
1 Attachment(s)
This may have been the #1 hull. Very nice detail but it's a little tight.
Has anyone ridden in one of these guys yet? |
36 Nor-tech interior
1 Attachment(s)
And another picture!
|
I WAS JUST WONDERING WHAT KIND OF SPEEDS PEOPLE WERE GETTING OUT OF THE 36 SKATER. wHAT MOTORS DO YOU HAVE
|
I have 575's and #6's. Depending on the usual I can see anything from 105 to 112. When we were originally running with 4 blades I saw 115-116 but that was light on fuel. The difference in the smoothness between the 4&5 didn't make it worth it to me.
|
I looked at all 3 boats and fell in love with the 36 Nor-Tech in every way, including the "service". I'll ask Terry if he can post some photos of the interior....With a pair of 900 hps the boat ran 130 mph right out of the box!!..with a little tweeking we can get over 135 and, the beam is 10'9" The boat runs real well in rough water
:crazy: zzie |
1 Attachment(s)
Thanks OZ,
Here's a pic of your dash |
All times are GMT -5. The time now is 08:09 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.