Sealed Engine ???
#1
VIP Member
VIP Member
Thread Starter
Sealed Engine ???
Just a question. What does it mean that someone has a "sealed engine". I have heard this several times and never asked what it means! Does it mean that there is a tamperproof tag or something of that nature or a special color of permatex sealer....Just wondering.
My inquiring mind wants to know!!!
Has there ever been a case where someone has gone into an Engine and made mods and "sealed" it back up and got caught?
Thanks in advance,
Craig
My inquiring mind wants to know!!!
Has there ever been a case where someone has gone into an Engine and made mods and "sealed" it back up and got caught?
Thanks in advance,
Craig
#2
Registered
Join Date: Oct 2002
Location: Lighthouse Point Fl
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
i think it means the motors are sealed off to keep them clean..?? we have some lycomings that are sealed right now.. in big boxes that you can't see the motors.. look like the big rubber made containors
#4
Registered
Join Date: Jan 2003
Location: Stafford Va.
Posts: 2,806
Likes: 0
Received 0 Likes
on
0 Posts
Well if its a race motor it will have some type of tag through a few different bolts so you can't take it apart without them knowing.
If it's just a motor at a shop it most likely means its on a pallet and in a bag or something like that.
As far as people getting busted taking tags off, I would ask Fever Mike.
If it's just a motor at a shop it most likely means its on a pallet and in a bag or something like that.
As far as people getting busted taking tags off, I would ask Fever Mike.
#6
VIP Member
VIP Member
Thread Starter
Originally posted by Lapse of Reason
All the ones I have seen on race motors are a piece of wire through some bolts sealed with a lead stamp thing.
All the ones I have seen on race motors are a piece of wire through some bolts sealed with a lead stamp thing.
#8
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Have you ever seen those little lead weights hanging from an electric meter? They usually have some numbers stamped into the weight. Well a sealed motor has one of those going through the intake manifold. That way you can't take open the engine up to modify it.
Custom was right though. The military will rebuild an engine and then "seal" it. I've heard of people opening crates that were sealed in the 50's and the engine is like new. I believe they even pressurize some of the crates.
Custom was right though. The military will rebuild an engine and then "seal" it. I've heard of people opening crates that were sealed in the 50's and the engine is like new. I believe they even pressurize some of the crates.
#10
Registered
Join Date: Dec 2003
Location: Los Angeles California
Posts: 8,306
Likes: 0
Received 2 Likes
on
2 Posts
In the past if the military didn't think they were going to use some piece of machinery in 30 days.... it was "sealed" and what that meant was it was dipped in some **** called "cosmolene". It looks like brown tar and grease mixed together and sealed the surfaces from any exposure to air... easy to remove with solvent.