Best way to remove vinyl grafphics?
#1
Registered
Platinum Member
Thread Starter
Join Date: Oct 2003
Location: New Baltimore , M.I.
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Best way to remove vinyl grafphics?
I picked up my new boat on Tuesday. It was only 7 deg outside, Michigan weather. Well I plan to re-due some of the stickers on the boat, not sure whats the best way to remove the old ones. I tryed the heat gun and finger nail but could take for ever! Well let me know what will work, thanks Kyle
#2
3M makes a wheel you put on a drill that takes them off. wokrs pretty good just be careful. . .nice ride by the way. . . . congrats
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#6
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
I know of the eraser, but I've never tried.
My .02...I like that graphic. It works with the lines of the boat extremely well. Kinda reminds me of the blackhawk donzis.
My .02...I like that graphic. It works with the lines of the boat extremely well. Kinda reminds me of the blackhawk donzis.
#8
Charter Member
Charter Member
Join Date: Oct 2000
Location: richmond virginia
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
then use goof off/goup off snot sure of the spelling, to get the glue off. Ryan if you use anything better please let un know, I just stripped my boat for the 4th or 5th time.
Eddie
Eddie
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
#9
Registered
Platinum Member
Thread Starter
Join Date: Oct 2003
Location: New Baltimore , M.I.
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
the bad part is some of the stickers are so old that they are dry and cracked into small pices. It's a pain in the a**. the last person put new vinyl over them, not vary professional.