Feedback on new engine 675HP SC
01-24-2004, 01:01 PM
#11
Platinum Member
Platinum Member
Steve, Sandy sent you some better pics of those 750's you built for us. Why dont you put the video up here of those bad boys being dynoed. Jeff
01-24-2004, 01:14 PM
#12
Registered
Thread Starter
Join Date: Mar 2002
Location: Louisiana
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Yes,
This is going to be a really good package. 4K is about what we think it should be. The EFI engine will cost a little more to set up and install,as well though, as the fuel system and accessories are a little more expensive than the carb set up.
The large capacity oil pan is a must for this set up. Our pans are custom built for each engine we build. They make much more HP than stock, as they have a deeper sump, better windage tray, trap doors and scraper.
Torque was 740 at 4200 rpm.
The whipple will fit under the stock hatch too.
We are taking orders for these now.
Thanks,
Steve
This is going to be a really good package. 4K is about what we think it should be. The EFI engine will cost a little more to set up and install,as well though, as the fuel system and accessories are a little more expensive than the carb set up.
The large capacity oil pan is a must for this set up. Our pans are custom built for each engine we build. They make much more HP than stock, as they have a deeper sump, better windage tray, trap doors and scraper.
Torque was 740 at 4200 rpm.
The whipple will fit under the stock hatch too.
We are taking orders for these now.
Thanks,
Steve
01-24-2004, 04:41 PM
#16
Registered
Thread Starter
Join Date: Mar 2002
Location: Louisiana
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
No, the dyno work is being done independently by a colleague in Mississippi. You gonna have the cig running this year? We'd like to see you at some of the poker runs.
Steve
Steve
01-24-2004, 04:52 PM
#17
Registered
iTrader: (2)
no, not this year, i may come swing by your place , i need my engine assembled. all the parts are here, talked with mark last year and he gave me a , well what i thought as a out of this world price to build and dyno
so it's all just sitting in boxes. all KE goodies, canfield 310's complete , 540 merlin block , steel caps. not looking to be the fastest , just reliable.
so it's all just sitting in boxes. all KE goodies, canfield 310's complete , 540 merlin block , steel caps. not looking to be the fastest , just reliable.
