Livorsis new throttles
#11
Gold Member
Gold Member
Gaffrig vs Livorsi...
Both companies offer excellent products & service. They both offer throttles/shifters. It just boils down to personal preference. Ed
#12
Guest
Posts: n/a
The Problem I have with my Top Gun is that I cannot reach the throttles when I am planted in my bolster and running more than half throttle. I have foward canted Livorsi's. (no short jokes!!!!)
I was going to replace them with the new racing style straight livorsi's, but I am not sure if the straight handle will give me enough reach. Now these pistol grips will definately do the trick.
Now the questions is do I wait to see what the deicated pistol grip throttles will look like, Any suggestions and any other possible solutions to my "lack of excess height"
Dan
I was going to replace them with the new racing style straight livorsi's, but I am not sure if the straight handle will give me enough reach. Now these pistol grips will definately do the trick.
Now the questions is do I wait to see what the deicated pistol grip throttles will look like, Any suggestions and any other possible solutions to my "lack of excess height"
Dan
#17
Registered
BustedGun,
I had the same problem with my TG and "Gaffrig" throttles a couple of years ago. I took the throttle apart and turned the arms around so they canted back towards my hand. Had to do a little bit of filing to get the trim switch wires to run through. Works great now!
I had the same problem with my TG and "Gaffrig" throttles a couple of years ago. I took the throttle apart and turned the arms around so they canted back towards my hand. Had to do a little bit of filing to get the trim switch wires to run through. Works great now!