Konrad 540 HP drive. A better idea!!!
04-21-2005, 03:21 PM
#201
Registered
Re: Konrad 540 HP drive. A better idea!!!
Damn Boys!!!! Looks like I need to quite selling parts and get out in the shop and work on my boat! You're making some good progress there Mr Cig. Keep it up!
I'm with Brian, I like where that x ended up.
Now back to the T-shirts... Kurt? Fred? WTF?!?!?!
I'm with Brian, I like where that x ended up.
Now back to the T-shirts... Kurt? Fred? WTF?!?!?!
04-21-2005, 03:22 PM
#202
Registered
Re: Konrad 540 HP drive. A better idea!!!
Brian,
I haven't forgoten your pullys, they're sitting in the shop I just forget to pick them up everytime I leave........
I haven't forgoten your pullys, they're sitting in the shop I just forget to pick them up everytime I leave........
04-21-2005, 04:04 PM
#203
Charter Member
Re: Konrad 540 HP drive. A better idea!!!
Originally Posted by p4-33
Hmmm,
Here's mine, same as the ones that were on my TRS's. They are an Eddie Marine part, sold as a Merc Bravo trim actuator. They clamp on to the trim cyl housing in the front, and the trim ram arm on the rear end.
Looks like we're dealing with different parts. How do yours attach?
Ask Fred or Kurt about the shirts... I'd like a few myself!
Thanks,
Brian
Here's mine, same as the ones that were on my TRS's. They are an Eddie Marine part, sold as a Merc Bravo trim actuator. They clamp on to the trim cyl housing in the front, and the trim ram arm on the rear end.
Looks like we're dealing with different parts. How do yours attach?
Ask Fred or Kurt about the shirts... I'd like a few myself!
Thanks,
Brian
I'll let you know how the new ones work out and take some pictures of the installation.
mark
__________________
If you like it rough do it OFFSHORE!!!
If you like it rough do it OFFSHORE!!!
Gold Member
Platinum Member
04-21-2005, 09:17 PM
#206
Registered
Re: Konrad 540 HP drive. A better idea!!!
Roger those look good! Damn, the fever spreads 
I've got great deals on drives if anyone is interested.
Fionn
[email protected]
541.8124
I've got great deals on drives if anyone is interested.
Fionn
[email protected]
541.8124
04-21-2005, 10:26 PM
#207
Registered
Re: Konrad 540 HP drive. A better idea!!!
Originally Posted by Zero Patience
Mine have a different steering setup.
Can you snap a picture of your trim actuators? Looks like yours are the same as MrCig's. Just curious how they're set up.
Thanks!
Brian
04-21-2005, 10:31 PM
#208
Registered
Re: Konrad 540 HP drive. A better idea!!!
Originally Posted by Lofty
Damn Boys!!!! Looks like I need to quite selling parts and get out in the shop and work on my boat! You're making some good progress there Mr Cig. Keep it up!
I'm with Brian, I like where that x ended up.
Now back to the T-shirts... Kurt? Fred? WTF?!?!?!
I'm with Brian, I like where that x ended up.
Now back to the T-shirts... Kurt? Fred? WTF?!?!?!
What's yours looking like? Got the motors in yet? Konrads installed? Pictures?
My last coat of Awlgrip went into the bilge tonight. Damn, that stuff is hard on the brain cells. Time to start rigging.
Cheers,
Brian
04-21-2005, 11:55 PM
#209
Re: Konrad 540 HP drive. A better idea!!!
Originally Posted by Quiet Storm
MrCig
Phase 1 is complete. I'm ready to try a test fit this weekend.
Roger
Phase 1 is complete. I'm ready to try a test fit this weekend.
Roger
I just got back from the chopper shop helping Tony on his Apache..\
I'll call you tommorow
Thanks
Mark
__________________
If you like it rough do it OFFSHORE!!!
If you like it rough do it OFFSHORE!!!
04-22-2005, 11:31 AM
#210
Registered
Re: Konrad 540 HP drive. A better idea!!!
Brian,
Still dressing the motors down and doing rigging work. I'll snap some pics this weekend and post up the progress. Yeah that Awlgrips' got a kick to it for sure! Just think of the money you'll save on beer....
Fionn
Still dressing the motors down and doing rigging work. I'll snap some pics this weekend and post up the progress. Yeah that Awlgrips' got a kick to it for sure! Just think of the money you'll save on beer....
Fionn
