should i change my screen name??
#26
cord- i use Clear Silmar 249 from U.S. Composites in the laminate and just a clear gel coat for the "window". since i'm using the carbon fiber for the apearance its not really necessary to do the layup in an epoxy. the weave in the carbon is very sensitive and has to be handled very carefully. cool stuff to work with, i can see myself using alot of it in the future
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#30
Guest
Posts: n/a
Originally posted by glassdave
Jim that should be cool. now if we can just get ya to put some graphics on the big ol' school buss
are they using a hybrid carbon/kevlar or carbon/tracer heres a pic of the hybrid. this stuff ruined my scisors in about 6 inches
madcow- no prob, i'll swap ya for some stainless risers or somthin. oh . . do you still have that vac pump.
Jim that should be cool. now if we can just get ya to put some graphics on the big ol' school buss
are they using a hybrid carbon/kevlar or carbon/tracer heres a pic of the hybrid. this stuff ruined my scisors in about 6 inches
madcow- no prob, i'll swap ya for some stainless risers or somthin. oh . . do you still have that vac pump.
The cloth we're using only about 10% yellow.
BTW Use the word EPOXY ( or at least imply you use it) whenever you can cause suddenly if it ain't "epoxy" it can't be any good Hell that dash panel will never live unless it's laid up and baked I was just enlightened by a guy who builds E P O X Y boats