New Spectre 32 !!!!!
#1
Registered
Thread Starter
New Spectre 32 !!!!!
Check it out !! the new 32's Mold is complete .. Hull # 1 starts this week
Maximus
Press Release Below
To: 2005 Spectre Dealers 5-10-04
Re: Spectre 32
We are very proud to announce the availability of the all new Spectre 32 Cat.
I have prepared a brief overview:
1)Design
The new Spectre 32 was actually built as a running plug. We ran the boat for a full 6 months developing and refining an all new design. There are several main differences in design from our current models. The running surfaces now utilize a 6 step design. The tunnel is considerably deeper which allowed us to raise the freeboard for a deeper cockpit. The transom incorporates a swim platform area which covers the drives.
2) Styling
Styling of the Spectre 32 is fresh and exciting. Our design team started with a clean sheet and came up with a new look unlike any other cat in the marketplace. We designed a new Polycarbonate windshield with attractive styling which protects all 5 occupants from excessive wind and spray. The windshield is manufactured in 3 parts and flows into the design of the sculptured deck lines. The cockpit is now a integral part with the deck. The all new dash design sports a all new look. All gauges and controls are attractively laid out for ease of operation in a contoured wrap around fashion similar to high end automotive styles. There is a molded glove box in the port dash for small carry on items. There are several interior styles to choose from including the traditional styles we use now or the all new race styled individual buckets. Storage is located in the side panels, beneath the rear seats and through a full width hatch located in the deck aft of the rear seats and in front of the outward hinged twin engine hatches. The engine compartment size has been increased for ease of maintenance.
3) Construction
The new Spectre 32 will be crafted using our proven techniques. All components begin with Supershield gelcoat, then are vacuum bagged utilizing Vinylester resin, Kevlar/Glass fabrics and foam core for a durable and light composite. Transom and engine stringers are pressure treated marine plywood.
Please call to discuss options, available production/delivery schedules
www.spectrepowerboats.com
Call Jay at 727-572-2213
Maximus
Press Release Below
To: 2005 Spectre Dealers 5-10-04
Re: Spectre 32
We are very proud to announce the availability of the all new Spectre 32 Cat.
I have prepared a brief overview:
1)Design
The new Spectre 32 was actually built as a running plug. We ran the boat for a full 6 months developing and refining an all new design. There are several main differences in design from our current models. The running surfaces now utilize a 6 step design. The tunnel is considerably deeper which allowed us to raise the freeboard for a deeper cockpit. The transom incorporates a swim platform area which covers the drives.
2) Styling
Styling of the Spectre 32 is fresh and exciting. Our design team started with a clean sheet and came up with a new look unlike any other cat in the marketplace. We designed a new Polycarbonate windshield with attractive styling which protects all 5 occupants from excessive wind and spray. The windshield is manufactured in 3 parts and flows into the design of the sculptured deck lines. The cockpit is now a integral part with the deck. The all new dash design sports a all new look. All gauges and controls are attractively laid out for ease of operation in a contoured wrap around fashion similar to high end automotive styles. There is a molded glove box in the port dash for small carry on items. There are several interior styles to choose from including the traditional styles we use now or the all new race styled individual buckets. Storage is located in the side panels, beneath the rear seats and through a full width hatch located in the deck aft of the rear seats and in front of the outward hinged twin engine hatches. The engine compartment size has been increased for ease of maintenance.
3) Construction
The new Spectre 32 will be crafted using our proven techniques. All components begin with Supershield gelcoat, then are vacuum bagged utilizing Vinylester resin, Kevlar/Glass fabrics and foam core for a durable and light composite. Transom and engine stringers are pressure treated marine plywood.
Please call to discuss options, available production/delivery schedules
www.spectrepowerboats.com
Call Jay at 727-572-2213
#10
Hey Maximus,
Thanks for the info on the new 32'. I guess I could call Jay, but I figure that you will know, where is the 32' measured from? Is the boat really a 30' and the swim step gives it the additional length?
Also, can you tell us how it performed and with what power? And can it use larger drives like #6's, or Weisman?
Thanks
Chris
P.S. Looks real good too!!!
Thanks for the info on the new 32'. I guess I could call Jay, but I figure that you will know, where is the 32' measured from? Is the boat really a 30' and the swim step gives it the additional length?
Also, can you tell us how it performed and with what power? And can it use larger drives like #6's, or Weisman?
Thanks
Chris
P.S. Looks real good too!!!