28 Skater Repower--- 2.5 race to 300x's
#102
Registered
Join Date: Mar 2001
Location: Rosedale,MD
Posts: 891
Likes: 0
Received 0 Likes
on
0 Posts
Re: 28 Skater Repower--- 2.5 race to 300x's
Originally Posted by mmwalters
Doug good to hear from you. I thought you sold the Motion. How do those yamies run?
#103
Allergic to Nonsense
Platinum Member
Thread Starter
Join Date: Aug 2001
Location: Granite Quarry, NC
Posts: 5,011
Likes: 0
Received 17 Likes
on
17 Posts
Re: 28 Skater Repower--- 2.5 race to 300x's
Originally Posted by dreamboater
I can with alot weight in the boat on a normal height of about 1 3/4 above the bottom. When I ran 109.2 I was only turning 6200. This weekend I just ran 107 @ 5900-6000 with a ton of water pressure, thats somewhere between 9-10% slip. I took the back seat out of the boat but was full of fuel and had my girlfriend in the boat. With 1 person, 1/4-1/2 tanks and motors raised about 1/4" I think I can break 110 maybe even get to the 112 mark. According to my Tachs though, my rev limiters do not come on until 6300-6400.
Bring the boat up to Joey at East Coast Marine...... You'll leave a few days later running low 120's....... without engine mods.......or spinning in...... simply proper setup
T2x
#104
Allergic to Nonsense
Platinum Member
Thread Starter
Join Date: Aug 2001
Location: Granite Quarry, NC
Posts: 5,011
Likes: 0
Received 17 Likes
on
17 Posts
Re: 28 Skater Repower--- 2.5 race to 300x's
Whoops ...cancel that I just realised we're talking about Promax's
Getting old is a pain.....as Emily Latella always said on Saturday Night Live.... "Never Mind".
T2x
Getting old is a pain.....as Emily Latella always said on Saturday Night Live.... "Never Mind".
T2x