updating power
06-12-2004, 10:36 AM
#1
Charter Member#203
Charter MemberThread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,409
Received 14,714 Likes
on
3,786 Posts
updating power
here are some photo's of a repower job on a 42 fountain with number 5's.
The first pic , the motors have been in and out, new mounts made, and engine compartment will be cleaned and painted with white imron.
The first pic , the motors have been in and out, new mounts made, and engine compartment will be cleaned and painted with white imron.
06-12-2004, 10:38 AM
#2
Charter Member#203
Charter MemberThread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,409
Received 14,714 Likes
on
3,786 Posts
Re: updating power
after paint , thru hulls and strainers installed.
Last edited by Pete B; 06-12-2004 at 10:43 AM. Reason: sp
06-12-2004, 10:40 AM
#3
Charter Member#203
Charter MemberThread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,409
Received 14,714 Likes
on
3,786 Posts
Re: updating power
then comes the fun part, time for the motors , and the project really takes shape
06-12-2004, 10:42 AM
#4
Charter Member#203
Charter MemberThread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,409
Received 14,714 Likes
on
3,786 Posts
Re: updating power
with alignment good time for the drives.
06-12-2004, 10:44 AM
#5
Charter Member#203
Charter MemberThread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,409
Received 14,714 Likes
on
3,786 Posts
Re: updating power
more pics added later also added to drives imco wing plates, and tie bar.
Last edited by Pete B; 06-12-2004 at 10:47 AM.
06-12-2004, 10:45 AM
#6
Charter Member#203
Charter MemberThread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,409
Received 14,714 Likes
on
3,786 Posts
Re: updating power
all work was done a Page Racing, in Ft, Myers Florida.
06-12-2004, 10:46 AM
#7
Charter Member#203
Charter MemberThread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,409
Received 14,714 Likes
on
3,786 Posts
Re: updating power
Engines are Innovation 900's !
06-13-2004, 02:06 AM
#9
Registered
Re: updating power
Originally Posted by Pete B
more pics added later also added to drives imco wing plates, and tie bar.
Is it a stepped boat?
If so, how far down below the bottom do you put your water pick ups to get in good water?
How much speed will they scrub off in your estimation?
Thanks
VIP Member
