Re: 3" Trailer Winch Straps
It stopped raining so I put it on. It fits between the winch nicely, no room to fold or wrap. My drum has a welded center post with a bolt thru it. There are also some small holes on either side of the center post. I ran a long bolt thru the loop and holes to hold it in the drum. I hooked it to the trailer and cranked hard, the strap is not moving yet but is winding tight on the drum. I am sure it will break in and tighten after a few launches. I would say 10ft would be enough but I think this will work fine. It is really heavy duty and the stitching does not stress at all which is where I wanted the strength, that and the hook, this one is major and will never break. I have a Fulton winch and it is 3" wide but nothing special.
|
Re: 3" Trailer Winch Straps
Originally Posted by WARPARTY36
I have HD ratchet straps in stock. They will not break. I can make them any length, and with any hooks that you see on the board above.
I just spoke to Warparty36, mine is on the way - thank you very much! |
Re: 3" Trailer Winch Straps
This is Awesome!! I was just looking to replace mine!! It's a 3in. strap as well.
Do you have different color's?? Also, if your going to market these, you ought to market rear tie downs also, the stainless ones you mentioned earlier would be super cool!!!! How much??? |
Re: 3" Trailer Winch Straps
Awesome is right! I've gone thru 2 ea. 2" straps this year on a 3" winch. I was going fabricate some spacers for the pulley, but this 3" strap sounds like the cats ass.
Warparty36....you have mail! Bruce |
Re: 3" Trailer Winch Straps
Originally Posted by FunHome
This is Awesome!! I was just looking to replace mine!! It's a 3in. strap as well.
Do you have different color's?? Also, if your going to market these, you ought to market rear tie downs also, the stainless ones you mentioned earlier would be super cool!!!! How much??? [email protected] |
Re: 3" Trailer Winch Straps
TURTLE,SANTI,& BRUCE. Your straps shipped ups ground today. Thank you, and let me know if you need transom straps.
|
Re: 3" Trailer Winch Straps
Mine showed up today and all I can say is WOW! Heavy duty and beyond what I've seen anywhere. Thank you Warparty and I hope you sell a lot of these to fellow OSOers.
Thanks for a great product! |
Re: 3" Trailer Winch Straps
I'm glad you liked it. :) So far, everyone has been pleased. What do you other guys think? Is there any way to improve it?
|
Re: 3" Trailer Winch Straps
Originally Posted by WARPARTY36
I'm glad you liked it. :) So far, everyone has been pleased. What do you other guys think? Is there any way to improve it?
|
Re: 3" Trailer Winch Straps
My drum only measures 2.25" wide. What do the rest of you guys drums measure? I've got a cable on mine now, and I hate it.
|
All times are GMT -5. The time now is 11:08 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.