Tightning down props
 

Whats the best way to tighten down a prop, other than using a piece of wood. I know I've seen some type of tool. The Nortech is on the lift now, and its hard to tighten the props down since I can't brace a piece of wood off the trailer. Thanks Jeff Jassby :D

Re: Tightning down props
 

I use a peice of wood between the cavitation plate.


Jeff where's your trailer :eek: :eek:


Eric (Racerx6) said he caught up with yall out at Cat Island the other weekend . You missed a good time out there for the 4th .

Rob

Re: Tightning down props
 

Wood between the cav plates

Re: Tightning down props
 

today i jest use my hand aginst the cav-plaet. OUCH i can't not type

Roby

Re: Tightning down props
 

Total Marine and Performance, For your hi performance needs, custom power, performance upgrades and accessories. 1-(985) 649-9888 or call my cell 1(228) 216-0900 Thanks, Jeff Jassby


The condoms yall hand out won't work? Maybe a piece of 4X4 will.
GETT WOOOD!!!!!!!

Re: Tightning down props
 

good ole wood :D :D I use it on my BIGGGG 3 blade and my HUUUGE alpha drive :rolleyes: :D :D :D and a huge impact gun :D

Re: Tightning down props
 

Jeff have a carpenter make a wooden Jig that slides in and over sandwiching the cavitation plate with a thick softwood block on the bottom side to lock/bind the Prop.. I Made a couple for the race Boats the Rollas were very sharp. That way it is a one Man job.

As always Best Regards

Re: Tightning down props
 

Combination prop tightening kit........PT # 104-033PK01

Re: Tightning down props
 

Problem with the condoms is they are xtra small...lol :drink:

Re: Tightning down props
 

I got wood! (kind of). I use a chunk of 4x4 and a torque wrench set @ 100 ft lb on my Speedmasters. It's all I can afford after making the boat payment and paying for the insurance, slip fee, heated winter storage and outragous gas prices! Lou